Checking the level and adding coolant Chevrolet Cruze J300 2008 - 2016

Parts and consumables:

• Coolant
• Rags

Warning:

Do not open the expansion tank cap while the engine is running or hot, as this will cause the coolant to boil and splash out, which can cause severe burns. Be sure to wait until the engine has cooled before opening the cover. Unscrew the plug slowly, gradually relieving pressure.

Checking the level and adding coolant Chevrolet Cruze J300

1. The coolant level is monitored on the wall of the expansion tank, which is marked with a maximum "MAX" level and a minimum "MIN" level. The level should be between these two marks, closer to the maximum.

Note:

The expansion tank is located on the right in the rear of the engine compartment.

2. If the level drops to the minimum mark or below, add coolant. To do this, open the expansion tank cap (see Warning).

3. Fill in the required amount of coolant.

4. Remove drips and replace the expansion tank cap.

The article is missing:

• High-quality photos of repair

Source: carpedia.club