One method for finding a short circuit is to remove the fuse and connect a probe lamp or voltmeter instead. There should be no voltage in the circuit. Pull the wiring while watching the probe lamp. If the lamp starts flashing, there is a short to ground somewhere in the wiring harness, possibly caused by worn wire insulation. A similar check can be made for each of the components of the electrical circuit by turning on the appropriate switches.
Source: http://automn.ru/toyota-camry-01/toyota-42216-10.m_id-5870.m_id2-5871.html

Net for cargo in the car Toyota Camry 2001 - 2006
5 - 30 minutes
[[ article.getBookmarkIcon() ]]
No tools



Clearance in the camshaft journals (outer diameter of the camshaft journal) Toyota Camry 2001 - 2006
1 to 3 hours
[[ article.getBookmarkIcon() ]]
Instrument


Replacing Front Springs and Shock Absorbers Toyota Camry 2001 - 2--6
1 to 3 hours
[[ article.getBookmarkIcon() ]]
Instrument

Checking the connecting rod and main journals of the engine model 1MZ-FE Toyota Camry 2001 - 2006
1 to 3 hours
[[ article.getBookmarkIcon() ]]
Instrument

Checking and replacing the ignition lock cylinder Toyota Camry
[[ article.getBookmarkIcon() ]]
Instrument

Disconnecting automatic transmission U241e from native ICE 1AZ-FE in Toyota Camry 2001 - 2006
3 - 6 hours
[[ article.getBookmarkIcon() ]]
lift