Checking and replacing the drive belt Chery Tiggo

Tools:

• Open end wrench - 15 mm

Parts and consumables:

• Accessory drive belt 

Checking the drive belt Chery Tiggo

The accessory drive belt does not require tension adjustment during its entire service life, since its design includes an automatic tensioner. If necessary, replace it. Check the condition of the belt by visual inspection. If the belt shows signs of severe wear or is oiled, it must be replaced.

An additional sign of the need to replace the accessory drive belt is a characteristic whistle (belt slip).

Replacing the drive belt Chery Tiggo

1. Remove the decorative engine cover against the resistance of the holders. More details here .

2. Turn the tensioner roller clockwise with a wrench until the belt tension is released.

3. Remove the accessory drive belt.

4. Install the new accessory drive belt in the reverse order of removal.

5. Rotate the crankshaft three full turns so that the accessory drive belt is in the correct position on the pulleys.

The article is missing:

• Tool photo
• Photos of parts and consumables
• High-quality photos of repair

Source: http://chery-tiggo.dv13.ru/dvigatel/proverka-i-zamena-remnya-privoda-vspomogatelnyx-agregatov/