Opening the hood of Toyota Yaris II 2005 - 2012

1. Grasp the handle and open the front door on the driver's side.

2.  Inside the car, under the dashboard, on the left side, there is a lever for opening the hood.

3.  Pull the hood release lever toward you until you hear a click that indicates that the hood has opened. The hood of the Toyota Yaris 2 will rise slightly.

Note:

The absence of a click when pressing the lever usually indicates that the cable for the hood latch has broken.

Very often, car owners put an electronic lock on the doors and hood, which can only be opened using the alarm control key fob. With its prolonged use, it is usually impossible to open the doors mechanically. Therefore, be sure to scroll through the standard Toyota Yaris 2 lock cylinders from time to time with a key.

4.  To open the hood, put your hand under it with your palm down and reach the latch. 

5. Move the hood latch to the left and lift the hood of the Toyota Yaris 2.

6.  Under the hood, in a special latch mounted on the battery, a stop is fixed. 

7. Remove the stop from the latch and install it at a special socket on the left side of the hood cover, thereby fixing the hood in the raised position.

Note:

After installing the support leg, make sure that the leg is securely installed in the appropriate hole in the hood and there is no possibility of it unexpectedly falling. If you doubt the reliability of the standard stop or it is simply missing, then pick up a strong bar of suitable length and install it between the body and the hood cover.

When closing the hood, make sure you remove the support leg and secure it securely in the appropriate fixture: closing the hood with the leg not folded can damage the hood.

Source:  carpedia.club