Chevrolet Lacetti Parking Brake Adjustment
Or to be more precise, adjusting the position of the parking brake handle, as pulling up takes place in the drums. There is nothing complicated in this process: we take a flat screwdriver (thin), remove the cover in the niche of the cup holders and see a stud with a nut for 12, remove the car from the parking brake (preferably fixing the car with anti-recoilers, that is, "shoes") and with a key for 12 we start very contrived tighten the nut on the stud. Periodically check the position of the handle (raise it). It is important not to overtighten. the drums will overheat and it will not lead to anything good! All the whole rubber and crumpled discs!
Source: https://www.drive2.ru/l/6116444/
Why does the rear window washer not work in hatches/cars?
[[ article.getBookmarkIcon() ]]
Instrument

Schematic diagram of the electric locks Chevrolet Lacetti 2004 - 2013
[[ article.getBookmarkIcon() ]]
Instrument

Schematic diagram of the ignition system Chevrolet Lacetti 2004 - 2013
[[ article.getBookmarkIcon() ]]
Instrument

Removing and installing rear door opening limiter Chevrolet Lacetti 2004 - 2013
[[ article.getBookmarkIcon() ]]
Instrument

Schematic diagram of ABS sensors Chevrolet Lacetti 2004 - 2013
[[ article.getBookmarkIcon() ]]
Instrument

Schematic diagram of the illumination of instruments and controls with a dimmer Chevrolet Lacetti 2004 - 2013
[[ article.getBookmarkIcon() ]]
Instrument

Removal and installation of the thermostat Chevrolet Lacetti 2004 - 2013
1 to 3 hours
[[ article.getBookmarkIcon() ]]
Pit / Flyover

Replacement washer reservoir Chevrolet Lacetti 2004 - 2013
[[ article.getBookmarkIcon() ]]
Instrument

Scheme of closing the contact group at different positions of the Chevrolet Lacetti 2004 - 2013 ignition switch
[[ article.getBookmarkIcon() ]]
Instrument

Schematic diagram of the audio system Chevrolet Lacetti 2004 - 2013
[[ article.getBookmarkIcon() ]]
Instrument