Headlight adjustment Renault Sandero

Check and adjust the headlights with the vehicle equipped (with a full fuel tank, a set of tools and a spare wheel).

  ​

1. Pre-check and, if necessary, bring the air pressure in the tires to normal.

2. Place the vehicle perpendicular to a smooth wall (eg in a garage) at a distance of 3 m. Place an additional weight of 75 kg on the driver's seat. Mark the screen on the wall as shown in fig. The longitudinal plane of symmetry of the car must pass along line  0  on the screen. Rock the car from the side to set the suspension springs on their own.

3. Measure the height of the headlight centers to the floor on your vehicle. This will be the distance  h  on the screen.

4. Set the headlight range control (if equipped) on the instrument panel to the position appropriate for the load of the single driver vehicle.

5. Turn on low beam.

6. The direction of the light spot is recommended to be adjusted for each headlight individually. Cover the second headlight with an opaque material during adjustment.

7. Open the hood and, turning the adjusting screw, adjust the position on the screen of the light spot for each headlight horizontally (the battery is removed for clarity in the photo) ...

8. ... and vertically, if the location of the light spots does not match the picture.

9 The headlights are considered adjusted when the upper borders of the left parts of the light spots coincide with line 4 (see the figure), and the vertical lines  1  and  2  pass through the points  E1  and  E2 of the intersection of the horizontal and inclined sections of the light spots.

Source: http://yourdacia.info/Logan-Sandero/to-1-regulirovka-sveta-far.php