Note:
The principle of adjustment on the front and rear doors is the same.
Adjusting the side door locks Hyundai Creta
1. Place the vehicle on a level surface and turn off the ignition.
2. Open the door.
3. To be able to return to the original setting, mark the position of the latch.
4. Using a Torx T40 wrench , loosen the two screws securing the Hyundai Creta door lock retainer.
5. By moving the latch back and forth and left and right, adjust it so that the door closes easily and tightly.
6 . After completing the adjustment, tighten the screws securing the lock retainer to a torque of 17-21 N•m.
Source: carpedia.club

Hyundai Creta tailgate gas strut replacement
30 minutes - 1 hour
[[ article.getBookmarkIcon() ]]
Instrument


Checking the oil level in the transfer box Hyundai Creta
30 minutes - 1 hour
[[ article.getBookmarkIcon() ]]
Pit / Flyover



Removing the tailgate trim Hyundai Creta
30 minutes - 1 hour
[[ article.getBookmarkIcon() ]]
Instrument

Hyundai Creta Pedal Position Sensor Replacement
30 minutes - 1 hour
[[ article.getBookmarkIcon() ]]
Instrument

Removing the glasses case on a Hyundai Creta
5 - 30 minutes
[[ article.getBookmarkIcon() ]]
Instrument

Removing the Hyundai Creta Air Filter Housing
30 minutes - 1 hour
[[ article.getBookmarkIcon() ]]
Instrument

Replacement of the water pump (pump) Hyundai Creta
1 to 3 hours
[[ article.getBookmarkIcon() ]]
Pit / Flyover