![1 generation [2007 - 2010]](/uploads/Nissan_Qashqai_2007-2010_.jpg)
When I put in a new radio, I ran into the problem of a flashing airbag light after the final assembly.
If you are also wondering: " How to reset the flashing airbag on Nissan Qashqai? ", Then here is the recipe for you:
Key position
We sit in the car, slam the door and insert the key
1) Turn to the ON mark (at the same time, all the lights on the tidy light up)
2) We follow the airbag indicator, it will burn for a couple of seconds and as soon as it goes out (after that it usually starts flashing if you have an airbag error), turn the key to the OFF position
3) Count to five
4) Repeat steps 1-2-3 TWO more times (you need to go through three full cycles)
5) Turn the key again to the ON mark (as in the first paragraph), the airbag indicator will start flashing at a slower pace.
This means that you have entered diagnostic mode.
6) Turn the key to the OFF mark, count to five (as in the third paragraph) and turn to the ON mark (as in the first paragraph)
If everything is done correctly, then the airbag will not bother you anymore!
Airbag indication and service interval reset knob
The same wanted to tell a way to reset the service interval and set the next interval .
1) Turn to the ON mark (at the same time, all the lights on the tidy light up)
2) Press and hold the reset button (right knob)
The service indicator will flash
3) Release the right stick
4) Press the knob again, after which the display will show a new service interval (10,000 km), but with the same knob you can set a different interval, just turn it clockwise / counterclockwise
Another useful feature I consider unlocking only the driver's door when disarming
1) Turn to the ON mark (at the same time, all the lights on the tidy light up)
2) Simultaneously press and hold the lock and unlock buttons on the key until the characteristic flashing of the turn signals turns
off (returns to standard mode) in the same sequence
Source: http://www.drive2.ru/l/3867256/
