Toyota
Corolla
E140/E150 [2006 - 2010]
Petrol
E140/E150 [2006 - 2010]
Maintenance
Body and Interior
Undercarriage
Transmission
Steering
Brake system
Engine
Electrical equipment
Ventilation and air conditioning system
Security system
Spare parts and consumables
Front wheel brake
Rear wheel brake
Parking brake
Other
Add to garage Filter

Toyota Corolla guide caliper lubrication

print share bookmark_border
0 Views
0.0 Rating
Lift
Not indicated
Car services nearby

I thought about painting the calipers — I began to pick up a repair kit. I found a repair kit - I came across a bunch of articles about lubricants. In general, I figured out with grief in half - what and what to smear!
What sellers in the store will offer you at the request of " lubricant for calipers " are copper and ceramic pastes, which dry out completely after a while and jam everything to the certs. They can only be smeared on the places where the pads rest in the caliper and the contact of the pistons to the pads, they go like  anti-creak PASTES .
For the same reason, the guides cannot be smeared, including with graphite and copper grease ... it will dry out and wedge. As it turned out, you can’t smear them with lithol either - the anthers swell, the lubricant flows out.

Now what is needed. Need silicone synthetic high temperature grease. This is how it will work.

Of the universal ones, this is Slipkote® 220-R DBC (tube 85gr)

There is also a 10 gram package.

Information.

…and further!

Here's where you can smear it.

as analogues from manufacturers, these are:
• BMW 81 22 9 407 103, 83 23 0 305 690;
• CHRYSLER/Mopar J8993704;
• FORD/Motorcraft D7AZ-19A331-A, XG-3-A;
• HONDA 08C30-B0224M, 08798-9027;
• LAND ROVER RTC7603, SYL500010;
• MAZDA 0000-77-XG3A;
• NISSAN 999MP-AB002;
• SUZUKI 99000-25100;
• TOYOTA 08887-80609;
• Volkswagen/Audi G 052 150 A2;
• Volvo 1161325-4;
• ACDelco 89021537 (10-4022);
• Federal Mogul F132005;
• FTE Automotive W0109;
• Stahlgruber 223 1712, 223 1729;
• TRW Automotive PFG110.

Now, in order ...
If you bought a repair kit (for example, this one):

Choose your own manufacturer.
From the factory, the guides are greased with "niglube rx-2" or "niglube rm" (Niglube RM - Orange, Niglube RX2 - Bright red), makes "nippon grease". The orange grease in the repair kit is what it is. Separately, the RX-2 can be purchased under the Subarovsky number 000041000

...made for subaru.
The red grease in the repair kit is a grease for the piston boot, made by "cosmo oil", can be bought under Toyota number 08887-01206:

...by Toyota.

Composition
- Base Oil / Base oil CAS number # 9003-13-8 is Polyalkylene Glycol (polyalkylene glycol oil) - 74-79%.
- Thickener (lithium soap) - 12-17%
- Additives - 7-12%.
Lubrication is prescribed by the manufacturer (in this case, Toyota, not Cosmo Oil Lubricants Co., Ltd.) for the master cylinder lip and piston. Consumption of one tube per 100 Toyota vehicles.
For lubricating rubber bands, namely anthers. By no means for guides, as many people think and do (even the official TOYOTA Service is guilty of this).
Together with the original anther kit, there is a bag of pink grease.

In general, between the anti-squeal plate and the pad, as well as in the guide pads (not in the caliper fingers!) You can use "ATE Plastilube" ("Bosch superfit" seems to be the same), number 03.9902 - 1001.2,
Mineral-based lubricant, to rubber undesirable, up to +180 C

There are several varieties of this lubricant.

There is also Toyota grease TOYOTA DISC BRAKE SHIM GREASE 5 g, p / n 08887-80409:

Black color.

Composition
- silicone oil
- silicon dioxide (silica gel)
- graphite.
Application in anti-creak plates, as well as in pad support plates.

Solid oil, lithol-24, graphite, grease for CV joints is not allowed! Guides will wedge!
And further. Bremsen Anti-Quitsch-Paste, art. 7585, 7573, 3077, 3079, 3074 blue-gray has a synthetic base and microceramic filler. It has heat resistance up to 1200 ˚С, that is, after the thermal degradation of the synthetic base, the ceramic filler remains an antifriction and non-stick component.
Application area:
For brake systems, it is recommended as an anti-creak paste. Apply to the back and sides of the brake pads in a thick layer to reduce vibration and squeak when braking. Do not use as a lubricant for caliper guides and pads due to the birth disease of all high-temperature pastes - coking during overheating and water ingress. It is also not recommended to lay the paste under the anther of the brake working cylinder. Failure to follow these recommendations often leads to souring of the caliper guides, as a result, the mobility of the compensation bracket is disturbed, the pads are warped, they are wedged and the brakes overheat.

Red lubricant for brake systems: Anti-Quitsch-Paste, art. 7656 - a package of 10 grams, the closest analogue of Parmatex Plastilube paste (green). Without fillers and silicones, it interacts well with rubber covers and anthers, heat resistance up to 250 ° C, which is quite enough for its field of application.
Scope:
Lubrication of caliper guide pins, laying under the anthers of brake cylinders to protect against corrosion and dirt, water penetration. Does not lose consistency during operation. Should not be used as an anti-creak paste due to insufficient heat resistance.
To summarize:

Anti-squeak pad treatment, Brake disc seat - Bremsen Anti-Quitsch-Paste, blue

Lubrication of the caliper guides, Bookmark under the anther of the brake cylinder - Anti-Quitsch-Paste, red.

Source: https://www.drive2.ru/b/1035033/

favorite 0
print
share
bookmark_border
None