Removing the glove box (glove box) Audi A6 4F/C6 2004-2011

Tools:

• Phillips screwdriver, medium
• Screwdriver flat medium
• Ratchet wrench
• socket head 8 mm

Parts and consumables:

• Glove box (glove box) (if necessary) (4F1 858 134 6PS - black (Soul), 4F1 858 134 EC3 - gray (Platin-hell), 4F1 858 134 4D9 - indigo, 4F1 858 134 8C1 - beige ( toronne), 4F1 858 134 12T - kardamombeige color)

Note:

This article describes how to remove the glove box Audi A6.

The glove compartment (ware box) is located on the passenger side.

The location of the glove box.

1.  Move the passenger seat as far back as possible.

2.  Under the glove compartment, unscrew the two lower bolts of its fastening.

Audi A6 glove compartment lower mount

3.  Use a flat screwdriver to pry and remove the side panel of the glove compartment (wrap a rag or tape around the flat screwdriver so as not to scratch the plastic).

Note:

It is better to pry not near the glove compartment, but from the side of the door seal.

4.  Open the glove box and unscrew the top three glove box fasteners.

Upper glove box mount Audi A6

5.  Gently slide the glove box back (drown it into the instrument panel) and lower the glove box to the floor.

6.  Disconnect the glove box wiring harness.

7. Similarly, disconnect another pair of pads from the glove box.

8. Install the Audi A6 glove compartment and all removed parts in the reverse order of removal.

The article is missing:

• Tool photo

Source:  http://carpedia.club