Removing and installing tailgate Nissan Qashqai

You will need: screwdrivers with a flat and Phillips blade, a “13” wrench.
1. Disconnect a wire from the minus plug of the storage battery.

2. Pry off an additional brake light with a screwdriver ...

3. ... and remove it from the niche in the tailgate.

4. Disconnect the tailgate glass washer hose.
5. Remove facing of a door of a back.

6. Disconnect the pads of the wiring harnesses of the additional brake light, tailgate lock drive, reversing light and tailgate glass heating. Squeezing the pad retainers with pliers, disconnect the pads from the tailgate panel.

7. Pry off with a screwdriver and remove the rubber seal of the casing of the tailgate glass washer hose from the hole in the tailgate.

8. Similarly, remove the rubber seal of the casing of the wiring harnesses from the hole in the tailgate. Remove the wiring harness from the hole in the tailgate.

9. If you remove the tailgate not for replacement, mark its position relative to the hinges, for example, by tracing the hinges along the contour with a felt-tip pen.

10. Turn on two nuts of fastening of a door of a back to both hinges and remove a back door.
11. Establish a back door and all details in an order, the return to removal.

Source: http://nissan-qashqai.dv13.ru/kuzov/snyatie-i-ustanovka-dveri-zadka/