Removal and installation of the radio Mazda 6 (GJ) 2012 - 2019

Tools:

• Screwdriver flat medium
• Plastic spatula

The procedure for removing and installing the radio on the Mazda 6

1. Starting from the side of the glove compartment, pry off the silver trim with a screwdriver or plastic spatula (snap off the fastening clips).

2. Disconnect the wire from the panel in the area of ​​the air ducts that feeds the alarm button.

3. Starting from the bottom, pry the frame of the radio with a spatula (fastened with plastic clips). Pull it towards you to remove the frame.

4. Remove 2 screws on both sides of the radio.

5. Remove the radio on the Mazda 6 by pulling it towards you. Disconnect all connectors from the radio.

6. Install the radio on the Mazda 6 in the reverse order of removal.

Source: carpedia.club