Removal and installation of wheel arch liners Skoda Octavia

tool:

Key with Torx tip (asterisk) Т25

1. Jack up the car and remove the front wheel using a wheelbrace as described here .

2. Turn out eight screws of fastening of the top part of a fender liner of a forward wheel (all operations are shown for the right fender liner, for the left fender liner the sequence of operations is similar). This will require a TORX T25 key.

Remove the eight screws securing the upper part of the front wheel liner Skoda Octavia

key TORX T25 Skoda Octavia

3. Remove the upper part of the front wheel liner.

Remove the upper part of the front wheel liner Skoda Octavia

4. Remove the two screws securing the tank to the bottom of the fender liner. This will require a TORX T25 key.

Remove the two screws securing the tank to the bottom of the Skoda Octavia fender liner

key TORX T25 Skoda Octavia

5. Turn out the screw of fastening of the bottom fender liner to a forward bumper. This will require a TORX T25 key.

Unscrew the screw securing the lower fender liner to the front bumper of the Skoda Octavia

key TORX T25 Skoda Octavia

6. Remove the lower part of the front wheel liner.

Remove the lower part of the front wheel liner Skoda Octavia

7. Install the parts in the reverse order of removal.

To remove the rear wheel liner, perform the following operations:

1. Jack up the rear of the vehicle and remove the rear wheel as described here .

2. Turn out nine screws of fastening of a back fender liner (all operations are shown for the right back fender liner, for the left fender liner the sequence of operations is similar). This will require a TORX T25 key.

Remove the nine screws securing the rear fender liner Skoda Octavia