![1 generation [2007 - 2010]](/uploads/Nissan_Qashqai_2007-2010_.jpg)
Tools:
- Open-end wrench 8 mm
- Open-end wrench 18 mm
Removing and installing starter Nissan Qashqai
1. Open the hood and place it on the stop.
2. Disconnect a wire from the minus plug of the storage battery.
3. Bend back the protective cap of the power cable lug.
4. Turn away a nut of fastening of a wire to the traction relay.
5. Disconnect a wire from a contact bolt of the traction relay.
6. Turn away a nut of fastening of a tip of a wire of the operating relay.
7. Disconnect a wire from the traction relay.
8. Turn out a bolt of fastening of a starter Nissan Qashqai to the block of cylinders.
Note:
Arrangement of bolts of fastening of a starter to the block of cylinders.
9. Remove the bolt from the hole. Similarly, unscrew and remove the lower starter mounting bolt from the hole.
10. Remove the starter.
11. Install the starter on the Nissan Qashqai in the reverse order of removal.
The article is missing:
- High-quality repair photos
- Tool photo
- Photo of parts and consumables
Source: http://nissan-qashqai.dv13.ru/elektrooborudovanie/snyatie-i-ustanovka-startera/
