Tool:
- Box wrench curved 10
- Key with Torx tip (asterisk) Т25
- Key with Torx tip (asterisk) Т30
Removal and installation of the rear bumper Skoda Octavia
1. Disconnect the wire from the negative terminal of the battery as described here .
2. Remove taillights as described here .
3. Remove the screws securing the rear wheel arch liners to the bumper of the Skoda Octavia. You need a TORX T25 key.
4. Turn out four screws of fastening of a back bumper of Skoda Octavia to its amplifier. You need a TORX T25 key.
5. Take away partially a lateral upholstery of a luggage space.
6. Turn out at the left and on the right on 2 bolts of fastening of a bumper to back wings. You need a 10 key.
7. Wring out clamps.
8. Remove on the left and on the right decorative overlays of a back bumper.
9. Turn out at the left and on the right on 2 screws of fastening of a bumper to a body. You need a TORX T30 wrench.
10. Remove the rear bumper of the Skoda Octavia.
11. Install the rear bumper and all removed parts in the reverse order of removal.
The article is missing:
- High-quality repair photos
Source: http://skoda-octavia2.ru/index.php/kuzov-skoda-octavia/242-zadnij-bamper-skoda-octavia-snyatie-i-ustanovka.html








