Removing and installing rear seat belt Chery Tiggo

 The right passenger seat belt is replaced in the same way.
You will need : 17mm wrench, flat and Phillips screwdrivers.
1. Fold down the rear seat.

2. Raise the trim on the lower seat belt anchor??

3 .... unscrew the bolt of the lower belt mount ...

4….and remove the mount.

5. Remove the bottom facing of a luggage carrier from the corresponding party.

6. Pry with a screwdriver and remove the facing of the upper seat belt anchor ...

7….remove the bolt of the top fastening of the seat belt…

8….and remove the top mount.

9. Turn out the screw of fastening of the coil of a seat belt...

10….bottom coil bolt…

11. and remove the seat belt from the vehicle.
12. Install the rear seat belt in the reverse order of removal.

Source: http://chery-tiggo.dv13.ru/sistema-passivnoj-bezopasnosti-srs/snyatie-i-ustanovka-zadnego-remnya-bezopasnosti/