Removing and replacing an additional brake light Hyundai Creta

Note:

The need for replacement is determined during the inspection of the technical condition of outdoor lighting.

Replacing the lantern of the additional brake light Hyundai Creta

1. Place the vehicle on a level surface and turn off the ignition.

2. Raise the tailgate.

3. Use a flathead screwdriver to pry off the trim.

4. Remove from the four holders and remove the trim.

5. Use a 10 mm socket to unscrew the 3 fastening nuts.

6. Gently pull the Hyundai auxiliary brake light out of the tailgate.

7. Press the latch and disconnect the wire block.

8. Turn counterclockwise and disconnect the washer nozzle from the brake signal.

9. Remove an additional brake light Hyundai Creta.

10. If necessary, replace with a new one.

Note:

Some drivers, instead of a regular one, install an LED brake light.

11. Install the additional brake light in reverse order.

Regular

LED

12. Check his work.

Source:  carpedia.club