Removing the oil pan in the Nissan Qashqai. HR16DE

1. Drain the engine oil.

2. Remove the oil pan (lower) as follows:

a. Loosen the bolts in the reverse order shown in the figure.

b. Insert a cutter (special tool: KV10111100) between the upper and lower oil pans.

Attention:

• Do not damage the contact surfaces.

• When shipped from the factory, a stronger sealant is applied than previously used sealants. Therefore, do not attempt to pry the drip tray off with a flat-blade screwdriver, etc.

1. Rear seal

2. O-ring

3. Oil pan (upper)

4. Chain tensioner

5. Oil pump drive chain

6. Crankshaft sprocket

7. Oil pump sprocket

8. Oil pan drain plug

9. Washer

10. Oil pan (lower)

11. Oil filter pin

12. Oil filter

13. Oil level sensor

Source: http://www.nissanoteka.ru/nt/%D0%A1%D0%BD%D1%8F%D1%82%D0%B8%D0%B5_%D0%BC%D0%B0%D1%81 %D0%BB%D1%8F%D0%BD%D0%BE%D0%B3%D0%BE_%D0%BF%D0%BE%D0%B4%D0%B4%D0%BE%D0%BD%D0 %B0_%D0%B2_Nissan_Qashqai._HR16DE