Tool:
- Metal brush
- Collar for end nozzle
- Nozzle on the crank 13 mm
Parts and consumables:
- Gear protection
- Mounting kit for gear protection
- graphite lubricant
Notes:
To achieve the desired result, it is necessary to buy a gearbox protection and a set of fasteners for it, catalog numbers PZ4AL A892000 and PZ4AL 0892060, respectively.
1. Clean the 4 threaded holes in the gearbox guard with a brush.
2. Apply graphite grease to the gearbox mounting bolts to prevent electrochemical corrosion of the threaded connection.
3. Attach the gearbox guard with the appropriate hardware kit using a socket wrench.
The article is missing:
- Tool photo
Source: https://www.drive2.ru/l/4081217/
Removing creaking and tapping in the wiper area Toyota RAV4
5 - 30 minutes
[[ article.getBookmarkIcon() ]]
Removing a creak in the front panel on the right Toyota RAV4
30 minutes - 1 hour
[[ article.getBookmarkIcon() ]]
Removing a creak from the instrument panel area Toyota RAV4
5 - 30 minutes
[[ article.getBookmarkIcon() ]]
Refinement of the standard Eberspacher heater on a Toyota RAV4 diesel engine
1 to 3 hours
[[ article.getBookmarkIcon() ]]
Removing the message "Adjustment of the lubrication system is required" Toyota RAV4
5 - 30 minutes
[[ article.getBookmarkIcon() ]]