Device car Chevrolet Lanos 2005 - 2009

General information about the car

The car - small middle class Chevrolet Lanos (class C according to the international classification) of the latest generation (T200) has been produced since December 2004 at ZAZ CJSC (Ukraine). It is a restyled version of the Korean car Daewoo Lanos, which, in turn, is developed on the platform of the Daewoo Nexia car. Since 2006, Chevrolet Lanos has been delivered to Russia in three trim levels: S, SE and SX.

Vehicle dimensions

Car configurations

The S package is basic, with the minimum required level of equipment, a full-size spare wheel and audio preparation (speakers, antenna and all necessary wiring).

On cars in the SE configuration, an additional power steering and a driver's airbag are installed.

The SX package, in addition to the above, includes air conditioning and power windows for the front doors.

Vehicle accessories

Cars - Chevrolet Lanos of all trim levels are equipped with a four-cylinder gasoline injection engine with a displacement of 1.5 liters, SOHC type (with one camshaft and 8 valves), with a power of 63 kW (85.7 hp) located across the engine compartment. The engine was developed on the basis of the G15MF (SOHC) engine of the Daewoo Nexia car with a working volume of 1.5 liters, but has some design differences in the ignition and power systems. Additionally, to reduce the toxicity of exhaust gases, the engine is equipped with an exhaust gas recirculation system. To comply with Euro-2 emission standards, the exhaust system is equipped with an exhaust gas catalytic converter.

body type

Body Chevrolet Lanos, type four-door sedan, load-bearing, all-metal, welded construction with hinged front doors, hood and trunk lid.

Windshield and rear glass glued.

The driver's and front passenger's seats are adjustable in the longitudinal direction and inclination of the backrest, equipped with head restraints. The rear seat backrest can be folded forward in parts in a ratio of 40:60.

Transmission

The transmission is made according to the front-wheel drive scheme with front wheel drives of different lengths. Cars are equipped with a five-speed manual gearbox.

Vehicle suspension and brake mechanisms

Front suspension Chevrolet Lanos MacPherson type, independent, spring, with anti-roll bar, with hydraulic shock absorber struts. The rear suspension is semi-independent, spring, with hydraulic shock absorbers.

The brake mechanisms of the front wheels are disc, with a floating caliper, the rear wheels are drum brakes, with a device for automatically adjusting the gaps between the brake shoes and drums. The brake system is equipped with a
vacuum booster and brake force regulators in the hydraulic drive.

Steering

The steering of the Chevrolet Lanos is safety, with a rack-and-pinion steering mechanism, a hydraulic booster is installed on some of the cars. Depending on the equipment, a frontal airbag can be installed in the steering wheel hub.

Vehicle safety

All vehicles are equipped with retractable diagonal seat belts for the driver, front passenger and outer passengers in the rear seat. A lap belt is provided for the middle passenger in the rear seat.

General specifications:

Number of seats, including the driver's seat - 5

Curb Weight, kg - 1036

Gross weight, kg - 1595

Ground clearance, mm - 160

Minimum turning radius, m maximum - 4.9

Minimum turning radius, m - 4.9

The maximum overcome slope,% - 50

Maximum speed, km/h - 172

Car acceleration time from standstill to speed of 100 km/h, s - 12.5

Fuel consumption, l/100 km;

at a speed of 90 km / h - 5.2

at a speed of 120 km / h - 6.7

in the urban cycle 10.4.

Octane number of gasoline - Not less than 92

Engine

Type - Four-stroke, gasoline with one overhead camshaft (SOHC)

Number, arrangement of cylinders - Four, vertically in a row

Working volume, cm3 - 1498

Cylinder diameter x piston stroke, mm - 76.5 * 81.5

Compression ratio - 9.5

Maximum power, kW (hp) - 63 (85.7)

The crankshaft speed corresponding to the maximum 5800

Maximum torque, Nm - 130

The frequency of rotation of the crankshaft corresponding to the maximum torque, min-1 - 3400

Transmission

Clutch - single-disk, dry, with a diaphragm pressure spring and a torsional vibration damper, permanently closed type.

The clutch release drive is hydraulic.

Gearbox - mechanical 5-speed with synchronizers in all forward gears

1st gear - 3.545

II transfer - 2,048

III transfer - 1,346

IV gear - 0.971

V gear - 0.763

Reverse gear - 3.333

Main gear - single cylindrical, helical

Final drive gear ratio - 4.176

Differential - conical, two-satellite

Wheel drive - open, shafts with hinges of equal angular speeds

Chassis

Front suspension - independent, spring, with hydraulic shock absorber struts and torsion-type anti-roll bar

Rear suspension - semi-independent, with coil springs, hydraulic shock absorbers and torsion-type anti-roll bar

Wheels - steel, disc, stamped

Tires - radial, tubeless

Tire size - 175/70 R13

Steering

Steering - safety, with hydraulic booster

Steering gear - rack and pinion

brakes

Workers:

Front - disc, with a single-cylinder floating bracket

Rear - drum, with automatic clearance adjustment

Service brake drive - hydraulic, double-circuit separate, made according to a diagonal scheme, with a vacuum booster and pressure regulators

Parking brake - with a mechanical drive to the rear wheels from the floor lever, with an indication of inclusion

electrical equipment

Wiring diagram - single wire, negative pole connected to ground

Rated voltage, V - 12

Battery - starter, maintenance-free, with a capacity of 55 Ah

Generator - alternating current, with built-in rectifier and electronic voltage regulator

Starter - with mixed excitation, remote control with electromagnetic inclusion and freewheel

Body

Type - sedan, all-metal, load-bearing, four-door, three-volume.

Elements of the car located under the hood

 
Engine compartment of the car (top view):

1 - Thermostat socket cover;  

2 - Cover of the gas distribution mechanism drive; 

3 - Air filter;

4 - Hose of the engine crankcase ventilation system; 

5 - Fuel rail;

6 - Air supply sleeve; 

7 - Upper shock absorber support; 

8 - Protective cover of the block of the wiring harness of the engine compartment;

9 - Throttle assembly;

10 - Exhaust gas recirculation valve; 

11 - Inlet pipe;

12 - Fuel pressure regulator; 

13 - Fuel filter;

14 - Absolute air pressure sensor in the intake pipe; 

15 - Vacuum brake booster; 

16 - Reservoir of the main brake cylinder; 

17 - Wiper motor reducer; 

18 - Expansion tank of the engine cooling system; 

19 - Reservoir of the hydraulic power steering system; 

20 - Relay and fuse mounting block; 

21 - Filler neck of the windshield washer reservoir; 

22 - Battery; 

23 - Ignition coil;

24 - Casing of the main electric fan of the cooling system; 

25 - Oil filler cap; 

26 - The working cylinder of the hydraulic clutch release; 

27 - Oil level indicator (dipstick) in the engine lubrication system; 

28 - Spark plugs;

29 - Engine cooling system radiator; 

30 - Casing of the additional electric fan of the cooling system; 

31 - Engine.

 
Engine compartment (bottom view) and the main units of the car:

1 - Right mudguard of the engine;

2 - Air conditioning compressor (if installed);

3 - Downpipe with bellows;

4 - Engine;

5 - Oil filter;

6 - Gearbox;

7 - Left front suspension support of the power unit;

8 - Windshield washer reservoir;

9 - Shock absorber strut of the front suspension;

10 - Brake mechanisms of the front wheels;

11 - Front anti-roll bar;

12 - Front suspension arm;

13 - Left front wheel drive;

14 - The lower cover of the gearbox;

15 - Rear support of the power unit;

16 - Anti-roll bar;

17 - Oil drain plug;

18 - Right front wheel drive.

 
The main units of the car (bottom rear view):

1 - Brake mechanism of the rear wheel;

2 - Shock absorber;

3 - Main silencer:

4 - Thermal screen of the main muffler;

5 - Towing eye:

6 - Coal adsorber of the fuel vapor recovery system;

7 - Rear suspension spring;

8 - Fuel tank;

9 - Rear suspension beam.

Source: carpedia.club