Replacing the additional brake light Renault Duster

Note:

An additional brake signal is located on the tailgate.

Replacement of a lamp of an additional brake light Renault Duster

1. Open the tailgate and push the 2 latches.
dismantle the casing of the additional signal.
 
2. To replace the lamp, push the cartridge stopper down and turn the lamp cartridge clockwise.

3. We take out the cartridge with the lamp from the base of the signal.

4. Pulling the lamp, pull it out of the cartridge.

5. We mount the new W16W lamp in the reverse order.

Replacing the additional brake light Renault Duster

1. To dismantle the additional signal, we take out the cartridge with the lamp (see above).

2. Using the Torx T-20 wrench, unscrew the three screws securing the signal.

3. Using a screwdriver, press the three latches and dismantle the additional signal.

4. Placement of clamps (for clarity, it is shown on the dismantled signal).

5. Stopper of an additional signal of braking.

6. We mount an additional brake signal in reverse order.

Source:  http://avtorial.ru/Renault/Renault_Duster-111.html