Checking the level and adding coolant Hyundai Elantra J5 MD

Parts and consumables:

• Coolant
• Rags

Notes:

It is advisable to check the liquid level in the expansion tank of the cooling system at each inspection of the car before leaving and be sure in case of engine overheating and the associated release of liquid from the system.

Use only the manufacturer recommended by the dealer. Remember that using poor quality coolant will result in costly engine repairs.

On a warm engine, the fluid in the cooling system is under excessive pressure. To avoid burns, do not remove the cooling system filler cap until the engine has cooled to a safe temperature. The expansion tank cap must be screwed on when starting the engine.

Checking the level and adding coolant Hyundai Elantra J5 

1. Park the vehicle on a level surface, open the hood as described here .The expansion tank is installed in the front of the engine compartment.

2. On the side of the reservoir there are marks  F  and  L , between which the liquid level should be on a cold engine.

3. If the fluid level in the reservoir is at or below the L mark, open the expansion reservoir cap.

4. Refill the tank in a coolant, a bit not bringing the level to the mark with the F.

5. After adding fluid, tightly close the cap of the coolant expansion tank.

Note:

Any coolant adhering to engine parts or paintwork must be removed with a cloth.

The article is missing:

• Photos of parts and consumables

Source: carpedia.club