- To do this, unscrew the fixing bolt B of the control unit.
- Next, unscrew the bolt of the sensor lever rod bracket.
- And disconnect from the block connector.
- After that, remove the control unit.
Installation is carried out in the reverse order.
Source: http://www.nissanoteka.ru/nt/%D0%A1%D0%BD%D1%8F%D1%82%D0%B8%D0%B5_%D0%B8_%D1%83%D1%81 %D1%82%D0%B0%D0%BD%D0%BE%D0%B2%D0%BA%D0%B0_%D0%B0%D0%B2%D1%82%D0%BE%D0%BC%D0 %B0%D1%82%D0%B8%D1%87%D0%B5%D1%81%D0%BA%D0%BE%D0%B3%D0%BE_%D1%80%D0%B5%D0%B3 %D1%83%D0%BB%D1%8F%D1%82%D0%BE%D1%80%D0%B0_%D0%BD%D0%B0%D0%BA%D0%BB%D0%BE%D0 %BD%D0%B0_%D1%84%D0%B0%D1%80

Removal and installation of the control unit for the heating, air conditioning and ventilation system Nissan Qashqai
1 to 3 hours
[[ article.getBookmarkIcon() ]]
Instrument

Periodic technical inspection of Nissan Qashqai inside the car
[[ article.getBookmarkIcon() ]]
Instrument

Replacement parts of the stabilizer bar rear suspension Nissan Qashqai 2007 - 2013
1 to 3 hours
[[ article.getBookmarkIcon() ]]
lift

Replacing the master cylinder of the hydraulic clutch release Nissan Qashqai 2007 - 2013
1 to 3 hours
[[ article.getBookmarkIcon() ]]
Instrument


Replacement of switches of plafonds of illumination of salon Nissan Qashqai 2007 - 2013
5 - 30 minutes
[[ article.getBookmarkIcon() ]]
Instrument

Replacement of contact group of the switch (lock) of ignition of Nissan Qashqai 2007 - 2013
30 minutes - 1 hour
[[ article.getBookmarkIcon() ]]
Instrument

Wiring diagram for the drive of the external rear-view mirrors and the internal rear-view mirror with anti-glare protection
[[ article.getBookmarkIcon() ]]
Instrument
