Checking and replacing the throttle position sensor Hyundai Matrix

You will need: autotester, screwdriver.

1. Disconnect the wire from the " negative " battery terminal.

2. Disconnect the wiring harness block from the sensor and measure the resistance between terminals " 1 " and " 2 " of the sensor block. For a good sensor, it should be about 2 kOhm. Connect the autotester to pins " 2 " and " 3 " . When the throttle is open, the resistance should be 700-1380 ohms, when closed - 2.6 kOhm.

3. To replace a faulty throttle position sensor 2, remove the two screws securing it.

4. Install the new sensor in the reverse order of removal.

Source: http://automn.ru/hyundai-matrix/hyundai-44413-10.m_id-6259.m_id2-6292.html

Removing, checking and installing the Hyundai Matrix gearshift mechanism lift

Removal and installation of the Hyundai Matrix steering column lock Instrument

Front brakes, guides lift

Checking the operation of the vacuum brake booster without the Hyundai Matrix tester No tools

Engine oil for Hyundai Matrix Instrument

Description immobilizer Hyundai Matrix Instrument

Basic checks and adjustments on the vehicle (A4AF3) lift

Hyundai Matrix battery maintenance

Cleaning the crankcase ventilation system Hyundai Matrix 5 - 30 minutes Instrument

Chassis specifications lift

Checking and replacing the throttle position sensor Hyundai Matrix

Login or register