Hyundai
Tucson
1 generation [2004 - 2010]
Petrol
1 generation [2004 - 2010]
Maintenance
Body and Interior
Undercarriage
Transmission
Steering
Brake system
Engine
Electrical equipment
Ventilation and air conditioning system
Security system
Spare parts and consumables
Clutch
Gearbox
Cardan Drive
Rear axle and front axle
Front-wheel drive
Other…
Add to garage Filter

Checking the level and topping up the working fluid in an automatic transmission Hyundai Tucson I 2004 - 2010

print share bookmark_border
0 Views
0.0 Rating
Tool
Not indicated
Car services nearby

Tools:

  • Phillips screwdriver, medium
  • Oil funnel

Parts and consumables:

  • rags
  • Automatic transmission oil (ZIC ATF SP-III or SK ATF SP-III) (04500-00100 - 1 l. 04500-00400 - 4 l. 04500-00A00 - 20 l.)

Oil in automatic transmission 04500-00100 - 1 l.  04500-00400 - 4 l.  04500-00A00 - 20 l.  by car Hyundai Tucson JM 2004-2010

Note:

This article describes how to properly check the oil level in an automatic transmission on a Hyundai Tussan.

According to the maintenance regulations, we check the fluid level in the automatic transmission after 15 thousand kilometers.

1. Place the vehicle on a level surface, apply the parking brake and start the engine, let it warm up to operating temperature.

2. Move the gear selector in turn in all positions: "R", "N" and "D", then leave the box in "N" or "P".

Translate the gear selector to P to check the automatic transmission oil level on a Hyundai Tucson JM 2004-2010

Gear selector for Hyundai Tussan.

3. Keep the engine running and open the hood.

Open hood on Hyundai Tucson JM 2004-2010

4. Pull out the dipstick of the oil level indicator and wipe it with a clean cloth, then insert the dipstick back.

Automatic transmission dipstick location on Hyundai Tucson JM 2004-2010

The location of the dipstick for the automatic transmission oil level indicator on the Hyundai Tussan.

Pull out the automatic transmission oil level dipstick on a Hyudai Tucson JM 2004-2010

Automatic transmission oil level gauge for Hyundai Tussan.

Wipe the dipstick of the automatic transmission oil level indicator on a Hyundai Tucson JM 2004-2010

5.  Remove the oil level indicator again. The correct oil level in the automatic transmission for the Hyundai Tussan should be in the inscription HOT. If the oil level is below it, you need to add oil.

Automatic transmission oil level dipstick on a Hyundai Tucson Jm 2004-2010

Note:

The COLD label is designed to control the level when changing the oil. That is, they poured it, filled it in, started it, put it in N and looked. If the level is between the COLD marks, then you can go and heat the oil for further checking. COLD means temperature from 10 to 20 degrees. The operating temperature of the oil is 80-90 degrees and it expands.

6. To top up the oil, you need to disconnect the clips of the air intake pipe.

Fastening of a branch pipe of an air inlet on the car Hyundai Tucson JM 2004-2010

7. Take the pipe aside and insert a special funnel into the tube of the oil level indicator. 

Insert a funnel for topping up automatic transmission oil on a Hyundai Tucson JM 2004-2010

Funnel for filling oil in automatic transmission on a Hyundai Tucson JM 2004-2010

Special funnel for pouring oil.

8. Fill in oil while monitoring its level on the dipstick.

Pour oil into the automatic transmission on a Hyundai Tucson JM 2004-2010

Note:

The maximum allowable fluid level must not be exceeded, as this may lead to transmission failure.​

The article is missing:

  • Tool photo
  • Photo of parts and consumables

Source:  http://carpedia.club/

favorite 0
print
share
bookmark_border
None