Parts and consumables:
- Windshield washer fluid or water
- rags
Notes:
The windshield washer fluid is located in a plastic reservoir located on the right side of the engine compartment.

1. Visually check the glass washer fluid level in the reservoir. If necessary, open the cap of the washer reservoir and fill it with the appropriate liquid.

Note:
In temperate climates, water can be used, but in this case, fill the tank only to 2/3 of the volume to allow for the expansion that can occur when the water freezes.
In cold climates, use a specially formulated windshield washer fluid. Mix the liquid with water in accordance with the recommendations of the liquid manufacturer, depending on the outside temperature.
It is not recommended to use antifreeze as a washer fluid, as it damages the car's paintwork.
2. Close the reservoir cap and wipe the engine surfaces with a rag if fluid splashes while filling the reservoir.
The article is missing:
- Photo of parts and consumables
Source: http://www.navigator.mn/toyota-rav4/tehnicheskoe-obsluzhivanie/roverka-urovney-ekspluatatsionnih-zhidkostey/zhidkost-v-omivatele-vetrovogo-stekla.html