Checking the oil level in a manual gearbox on an Audi A4

Tools:

• Socket wrench for polyhedron AUDI-3357

1 . Park the vehicle on level ground.

2 . Raise and place the car on the site.

3 . Unscrew the oil filling plug, depending on the version, using a 10 mm socket wrench, eg HAZET 985-10 or a polygon socket wrench, eg AUDI-3357 or HAZET 2567-16. The plug is located on the left of the gearbox under the speed meter sensor and can be covered with a heat shield on the drive shaft.

AUDI-3357.

4 . Check the oil level with a wire bent at an angle. The oil level should be 7mm below the lower edge of the oil fill hole.

5 . Tighten the plug with a torque of 25Nm.

Source: http://carmanz.com/audi/a4-b6-2000-2004/6575-a420006-3.html