Seat adjustment

Front seat adjustment

1 - handle of the blocking lever;

2 – height adjustment lever;

3 - hinge handle.

Before driving, adjust the seat so that you feel comfortable behind the wheel. An uncomfortable seat increases fatigue, which can adversely affect driving safety.

Warning:

Do not adjust the seat while driving - you may lose control of the vehicle.

Order of execution

1.  To adjust the seat in the longitudinal direction, lift the handle 1 of the locking lever, move with the seat to the desired position and release the handle. Then move the seat back and forth slightly to lock it in the selected position (you will hear a click).

2.  To adjust the seat height, use the lever 2. To raise (lower) the seat, swing the lever after setting it to the upper (lower) position.

3.  If you need to adjust the inclination of the seatback, turn the handle 3 of the hinge. The seatback is raised or lowered by turning the handle in the appropriate direction.

Warning:

Do not recline too far back while driving, otherwise the effectiveness of the seat belts will be lost.

4.  To adjust the height of the head restraint 1, lift it up or down in direction "A". Spring clips will hold the headrest in the selected position. The head restraint is properly adjusted when its top edge is at or above the eye level of the seated person. On some models, you can adjust the inclination of the headrest in the direction "B" (only in the front seat) (2 - seat back).

5.  To remove the head restraint 1, lift it up to the stop, then press the latch 2 and remove the head restraint from the backrest 3. When installing the head restraint, a click should be heard when it is locked.

Read about how to adopt the correct safe landing in a chair .

Source:  http://www.navigator.mn/skoda-fabia.html