Removing the cylinder head in the Nissan Qashqai. HR16DE

1. Relieve fuel pressure. See chapter ENGINE MANAGEMENT.

2. Drain the engine coolant and engine oil. See the ENGINE LUBRICATION AND COOLING SYSTEM chapter.

Attention:

• Perform this operation when the engine is cold.

• Keep engine coolant and engine oil away from the drive belt.

3. Remove the following components:

• protective pad from the front right fender; see chapter INTERIOR AND EXTERIOR EQUIPMENT;

• generator; see chapter ELECTRIC;

• front exhaust pipe; see chapter Fuel system;

• exhaust manifold; see above;

• intake manifold; see above;

• fuel injectors and fuel tube assembly; see above;

A: Release

B: intake

5. Remove the gasket from the cylinder head.

• outlet pipe; see chapter LUBRICATION SYSTEM AND ENGINE COOLING SYSTEM;

• drive belt; see above;

• front cover; see above;

• camshafts; see above.

4. Remove the cylinder head by loosening the bolts in the reverse order shown in the figure, using a wrench (suitable special tool).

Source: http://www.nissanoteka.ru/nt/%D0%A1%D0%BD%D1%8F%D1%82%D0%B8%D0%B5_%D0%B3%D0%BE%D0%BB %D0%BE%D0%B2%D0%BA%D0%B8_%D1%86%D0%B8%D0%BB%D0%B8%D0%BD%D0%B4%D1%80%D0%BE%D0 %B2_%D0%B2_Nissan_Qashqai._HR16DE