Removal and installation of the battery Nissan Qashqai 2007 - 2013

Tools:

• Open-end wrench 10 mm

Parts and consumables:

• Fine sandpaper
• Grease "Litol-24"

Removing and installing a Nissan Qashqai battery

1. Open the hood and place it on the stop.

2. Loosen the nut of the power cable lug pinch bolt.

3. Disconnect a wire from the minus plug of the storage battery.

4. Open the protective cover and loosen the handpiece pinch nut.

5. Disconnect the wire from the positive terminal of the Nissan Qashqai battery.

6. Loosen the nuts securing the clamping bar.

7. Remove the ties from the holes in the battery mounting shelf and remove the clamping bar assembly with the ties.

8. Remove the handle from the slot in the battery case.

9. Remove the Nissan Qashqai battery from the engine compartment.

10. Install the battery and all parts in the reverse order of removal.

Notes:

Before connecting the wires, clean the battery terminals and the inside surfaces of the wire lugs with fine sandpaper. Connect the wires in the reverse order of removal, observing polarity.

After connecting the wires to the terminals, apply a thin layer of Litol-24 or similar grease to the wire lugs and exposed surfaces of the terminals (copper-containing conductive greases are most preferred).

The article is missing:

• High-quality repair photos
• Tool photo
• Photo of parts and consumables

Source: http://nissan-qashqai.dv13.ru/elektrooborudovanie/snyatie-i-ustanovka-akkumulyatornoj-batarei/