![1 generation [2010 - 2015]](/uploads/Hyundai_ix_35_2013_-_2015_.jpg)
Tools:
- balloon wrench
- Emphasis (shoe) recoil
- Support legs
- Screw jack (2 pcs.)
- Hammer big
- L-shaped socket wrench 14 mm
- L-shaped socket wrench 17 mm
Parts and consumables:
- Rear shock absorbers (if needed) (55311-2S000 for 2WD vehicle, 55311-2S400 for 4WD vehicle)
Note:
This article describes how to replace the rear shock absorbers on the Hyundai ix35.
1. Engage 1st gear (transfer the automatic transmission selector to the “P” position) and install the chocks “boots” under the front wheels.
2. Loosen the wheel nuts, jack up the rear of the vehicle, securely support the vehicle and remove the wheel.
Warning:
Loosen and tighten the wheel nuts only with the vehicle on the ground.
3. Loosen the upper shock absorber bolts.
4. Support the rear arm with a jack and unscrew the lower shock absorber mounting nut (the bolt can be easily knocked out with a wooden hammer handle).
Rear shock absorber mounting bolt for Hyundai ix35 with 2WD.
Rear shock absorber mounting bolt for Hyundai ix35 with 4WD.
5. Finally unscrew the shock absorber upper mount and remove the shock absorber.
Rear shock absorber for Hyundai ix35 with 2WD.
Rear shock absorber for Hyundai ix35 with 4WD.
6. Install the rear shock absorbers on the Hyundai ix35 in the reverse order of removal.
The article is missing:
- Tool photo
- Photo of parts and consumables
Source: http://carpedia.club/
