Removal and installation of facing of a door a luggage carrier Mercedes-Benz W203

Tailgate trim. Sports Coupe 
 

1 - Handle Bar  2 - Bottom Trim  3 - Lock Cable Button  4 - Frame Side Trim  5 - Lock Bracket  6 - Upper Frame Trim  7 - Lock Bracket	8 - Cover  9 - Center trim  10 - Locking tab  11 - Screws  12 - Cover  13 - Trim strip

Sports Coupe 
Removal 

The designations "oben" (top) and "unten" (bottom) refer to the closed position of the tailgate.

PROCEDURE

1. Open the tailgate. 
2. Remove the expansion clip from the handle bar (1). 
3. Remove the 2 tabs from the handle opening and pull the handle bar out of the tailgate. 
4. Pull the bottom trim (2) down from the tailgate and remove. 
5. Turn out the button (3) of a lock cable of the right and left shelf from a lateral facing of a window. 
6. Separate and remove with a plastic wedge, eg HAZET 1965-20, the side trim of the frame (4) on the right and left at the rear window from the bracket holders (5). 
7. Detach the upper trim (6) from the bottom of the bracket holders (7) and remove the trim upwards. Do not break the plastic strips inside. 
8. Disconnect the cover (8) from the central lining of the tailgate (9). At the same time, place the plastic wedge at the bottom and detach the cover from the three holders (10).

9. Remove the screws (11) behind the cover and at the bottom of the trim (9). 
10. Disconnect facing below and remove it upwards from a back door.

Installation

PROCEDURE

1. Insert the center trim at the bottom into the guides and lock into place. Attach the trim to the tailgate. 
2. Further installation is carried out in the reverse order of removal.

Source: http://www.auto-knigi.com/model/mb_c/13_1_43/