Removal and installation of the front wing Nissan Qashqai 2007 - 2013

 Tools:

• Open-end wrench 10 mm
• Screwdriver flat medium
• Phillips screwdriver, medium
• pliers

Parts and consumables:

• Car front fender

Note:

It is more convenient to carry out work on removing the front wing on a lift.

1. Remove the front wheels.

2. Disconnect the negative terminal from the battery.

3. Remove the front bumper as described here .

4. Remove headlight as described here .

5. Remove the side turn signal light as described here .

6. Use a screwdriver to pry out the retainer of the piston A of the fastening of the decorative lining of the sidewall of the wing.

The location of the caps A fastening the decorative lining of the sidewall of the wing and the bolts B of the upper fastening of the wing to the body.

7. Remove the piston from the hole. Remove the other piston in the same way.

8. Remove a decorative overlay of a sidewall of a wing.

9. Turn out bolts B (item 6 see) of the top fastening of a wing to a body.

10. Turn out a bolt of back fastening of a wing to a body.

11. Turn out a bolt of fastening of an arm of a forward wing in a wheel arch.

12. Turn out two bolts of the bottom fastening of a wing to a body threshold.

13. Remove the front fender.

14. Establish a wing and all details in an order, the return to removal.

Source: http://nissan-qashqai.dv13.ru/kuzov/snyatie-i-ustanovka-perednego-kryla/