Removal and installation of a starter Mercedes-Benz W203

Tool:

• Stands for cars
• Jack

To start an internal combustion engine, an electric motor, called a starter, is needed. In order for the car engine to work, it must be revved up to a speed of at least 300 rpm. This can be achieved if the starter works reliably and the battery is charged.

Since a large amount of electricity is required to start the engine, when carrying out maintenance, it is necessary to pay attention to the reliable connection of the cables. Rusted contacts should be cleaned and lubricated with grease.

Withdrawal

1. You must first remove the cabin air filter box.

2. Disconnect the negative (-) battery cable with the ignition off.

3. Raise and place the front of the vehicle on stands.

4. Remove the bottom cover.

5. Engine 112: Remove the exhaust system.

6. Turn away nuts and disconnect electric wires from a starter.

7. Turn out 2 screws on a starter.

8. Take aside the cable harness with the holder and take the starter down from the engine compartment.

The article is missing:

• Tool photo
• High-quality repair photos

Source:  http://www.auto-knigi.com/model/mb_c/7_4_10/