Removing and installing thermostat Hyundai Tucson I 2004 - 2010

Tools:

• L-shaped socket wrench 10 mm
• L-shaped socket wrench 12 mm
• Phillips screwdriver, medium
• Technical capacity

Parts and consumables:

• Thermostat (25500-23001 or 25500-23010)
• Thermostat gasket/ring (25633-23010)

Note:

This article describes how to replace the thermostat on a Hyundai Tussan.

1. Using the “10” wrench, loosen the nut and remove the wire terminal from the “negative” battery terminal.

2. Turn off the valve and merge a liquid of the cooling system.

3. Disconnect the clips and remove the air intake pipe.

Clip removal instructions.

Removed air intake.

4. Turn off four bolts of fastening of a cover of the engine and remove it.

Decorative engine cover.

5. Remove the air filter housing. 

6. Disconnect the block of wires from the clamp of the block of wires of the ignition coil.

7. Remove the casing of the Hyundai Tussan thermostat cover  from the studs.

8. Turn off two bolts of fastening of a cover of the thermostat and remove the case.

9. Remove the thermostat gasket and the thermostat itself.

10. If necessary, replace the Hyundai Tussan thermostat with a new one.

Thermostat for Hyundai Tussan

Thermostat gasket for Hyundai Tussan

Note:

The gasket must be replaced.

10. Install all removed parts in the reverse order of removal.

11. Fill in coolant.

The article is missing:

• Tool photo
• High-quality repair photos

Source:  http://carpedia.club/