The rear seat consists of a cushion and backrest, which, in turn, consists of two parts, each of which can be removed separately.
You will need a socket head "16".
1. Grasp the front edge of the pillow...
2. ... lift the pillow, slide it forward, removing its latches from the two holes in the base of the body ...
3. ... push the rear seat belt buckles under the cushion ...
4. ... take the locks back and remove the pillow from the car.
5. Pry off the edge of the rear trim of the right sill of the body ...
6. ... and remove the lining, overcoming the elastic resistance of its latches.
7. Similarly remove facing of the right back rack of a body.
8. Turn off two nuts of fastening of an external hinge of the right part of a back to a body …
9. ... and remove the right side of the backrest.
10. Turn out a bolt and turn away a nut of fastening of an internal loop of the left part of a back.
11. Unscrew the two nuts securing the outer loop of the left side of the backrest in the same way as it was done for the right side (see paragraphs 9 and 10) and remove the left side of the backrest.
12. Install the parts in the reverse order of removal. Apply an anaerobic threadlocker to the rear seat back bolts and nuts before installation.
Source: http://nissan-qashqai.dv13.ru/kuzov/snyatie-i-ustanovka-zadnego-sidenya/








