Removing the rear door power window mechanism Renault Duster

We are working to replace the power window.
We remove an upholstery of a back door (Removal of an upholstery of a back door see).
We unscrew the screws that secure the glass holders to the power window slider (see Removing the rear door glass).

We lift the glass with our hands and fix it with electrical tape or tape.

Using a screwdriver, we press the latches of the upper plastic holder of the wiring harness.

We remove the holder from the hole in the inner panel of the door.

Similarly, we remove the lower holder of the wiring harness from the hole in the inner panel of the door.

Using the “10” head, unscrew the three nuts securing the power window mechanism to the inner door panel.

We shift the mechanism to a large technological hole in the inner panel of the door.

We compress the clamps of the wire block and disconnect the block from the electric window lifter motor.

We take out the power window mechanism through the technological hole in the inner panel of the door.

Power window mechanism.
Install the power window mechanism in reverse order.

Source: http://www.renault-duster.dv13.ru/kuzov/snyatie-mexanizma-elektrosteklopodemnika-zadnej-dveri/