Removing the lining of the tailgate Nissan X-Trail

Note:

Before removing the Nissan X-Trail tailgate trim, you will first need to remove the door trim.

Removing the tailgate trim Nissan X-Trail

1.  Place the car on a level surface, and turn off the ignition.

2.  Raise the luggage compartment lid.

3.  Turn the door light switch to the OFF position.

4.  Pry off the cover with a flat screwdriver and remove it from the door trim.

5.  Disconnect block and remove a plafond of lighting.

6.  Pry with a flathead screwdriver and pull out the 2 holders.

7.  Pry with a flat screwdriver, remove from the holders and pull the inner handle out of the casing.

8.  Pull towards you, remove from the latches and remove the upper trim element. 

9.  In the same way, remove the side trim from both sides.

10.  Using a flat screwdriver or a plastic spatula, pry off the lower part of the door trim around the entire perimeter, until all its holders (12 pcs.) exit the door panel.

11.  Remove a covering of a door of a luggage carrier in gathering.

Removing the lining of the tailgate Nissan X-Trail

1. Using an 8 mm socket, unscrew the 6 nuts securing the lining.

• 1-6 - fastening nuts;
• 7-12 - fastening clamps.

2. Pull towards you, remove from the 6 holders, and remove the Nissan X-Trail tailgate trim.

3. Inspect her condition. If necessary, replace the door trim with a new one.

4. Install the Nissan X-Trail tailgate trim in the reverse order of removal.

5.  Establish a covering of a door of a luggage carrier in an order, the return to removal. Press it against the door until the holders are fixed in the holes.

Source:  carpedia.club