Removing the upper part of the intake manifold of the engine model 1MZ-FE Toyota Camry 2001

Tools:

1. Using a 5mm socket wrench, remove the two nuts and remove the motor cover.

T-shaped socket wrench

Engine protection cover 1MZ-FE Toyota Camry

2. Using a socket wrench on 8 mm remove the top part of an inlet manifold.

Intake manifold 1MZ-FE Toyota Camry

Removing the upper part of the Toyota Camry intake manifold

Removing the upper part of the intake manifold

3. Remove ignition coils.

Remove ignition coils 1MZ-FE Toyota Camry

4. Disconnect the high voltage wires from the spark plugs, holding them only by the rubber tips.

High voltage wires 1MZ-FE Toyota Camry

5. Turn out spark plugs.

candle key

Removing spark plugs 1MZ-FE Toyota Camry

6. Remove the cylinder head covers .

Removed cylinder head cover Toyota Camry

Source: http://carmanz.com/toyota/camry-2001-2006/231022-tc2001438.html

Valve drive mechanism for Toyota Camry 2001 - 2006

Steering Toyota Camry 2001 - 2006. Design features

Engine control system diagram (2AZ-FE, 1AZ-FE) - part 4 Instrument

Intake and exhaust system of the engine 1MZ-FE Toyota Camry 2001 - 2006. General information

Removing and installing the Toyota Camry battery Instrument

1MZ-FE engine cylinder head assembly lift

Generator installation (models with engine 1 and 2 AZ-FE) Toyota Camry lift

Disassembly of the Toyota Camry generator lift

Check of control indicators (except for a control lamp of low level of fuel) on Toyota Camry 2001 - 2006 5 - 30 minutes

Removal and installation of an adsorber of system of catching of steams of fuel lift

Removing the upper part of the intake manifold of the engine model 1MZ-FE Toyota Camry 2001 - 2006