Installation of balancer shafts Toyota Camry 2001 - 2006

Tools:

• Nozzle on the crank 10 mm
• torque wrench

Parts and consumables:

• Balance mechanism
• Motor oil
• Dye

Note:

Removing the balance mechanism cover is described here .

1. Turn driven gear #1 of balance shaft #1 in the direction of rotation until it stops, making sure that the marks on gears #1 and #2 are aligned.

 Correct gear position

2. Place the balance shafts in the crankcase.

3. Apply a little engine oil to the threads and under the heads of the balancing mechanism cover bolts.

4. Evenly, in several passes, in the sequence shown in the figure, tighten the 8 fastening bolts with a tightening torque of 22 Nm.

The order of tightening the bolts of the cover of the balancing mechanism

5. Mark the bolts.

6. Tighten the bolts 90° in the above sequence.

7. Verify that the marks on the bolts are now at 90° from their original position.

The article is missing:

• High-quality repair photos

Source: http://carmanz.com/toyota/camry-2001-2006/230182-tc2001354.html