Installing cylinder head bolts Toyota Camry 2001 - 2006

Tools:

• Nozzle on the crank 10 mm
• socket wrench
• torque wrench

Parts and consumables:

• Engine oil
• Bolts of fastening of a head of the block of cylinders
• Dye

1. Wrap bolts of fastening of a head of the block of cylinders. The block head bolts are tightened in two stages. Before installing, apply a little engine oil to the threads and under the bolt heads.

2. Evenly, in several passes, tighten the ten cylinder head bolts to a tightening torque of 79 Nm in the sequence shown in the figure.

The order of tightening the cylinder head bolts

Note:

If one of the bolts is damaged, replace it.

3. Mark the edge of the bolt facing the front of the engine.

4. Tighten all bolts 90° in the above sequence. Make sure all bolt marks are rotated 90° from their original position.

5. Install the VVT-i valve and tighten to 9 Nm.

6. Install camshafts.

7. Establish the bottom loose leaf of the forward bearing of a camshaft.

The article is missing:

• Repair Descriptions
• High-quality repair photos

Source: http://carmanz.com/toyota/camry-2001-2006/230202-tc2001356.html