![2 generation [2007 - 2013]](/uploads/Renault_Kangoo_II.jpg)
Note:
The negative terminal in the fuel pump connector melted, and the car stopped starting. The on-board computer issued a CHECK EMISSION with an error p0300 - misfiring.
Broken terminal.
1 . I cleaned the terminals from soot (as it turned out, the fuel pump itself was in order), stuck it in and started working. Now we need to solve this issue, I found options.
As a variant of one of the solutions to this problem.
The second solution to this problem.
2 . I chose the second option for solving this problem, it is the most reliable, but this way you have to unscrew the lid and remove the glass.
The article is missing:
- Tool photo
- High-quality repair photos
- Repair Descriptions
Source: https://www.drive2.ru/l/5697552/
Pulling cruise control wires from the ECU to the passenger compartment
3 - 6 hours
[[ article.getBookmarkIcon() ]]
Instrument
Restoration of bumper plug fasteners (2nd option)
1 to 3 hours
[[ article.getBookmarkIcon() ]]
No tools
Replacing the inner handle of the rear side door
5 - 30 minutes
[[ article.getBookmarkIcon() ]]
Instrument
Installing an additional handle on the sliding passenger door
1 to 3 hours
[[ article.getBookmarkIcon() ]]
Instrument
Cleaning the drain hole of the air conditioner
30 minutes - 1 hour
[[ article.getBookmarkIcon() ]]
Instrument
