Hyundai Creta Reversing Light Bulb Replacement

Note:

Do not install light bulbs of higher power than recommended in the instructions.

When working with lamps, it is advisable to disconnect the wire from the "negative" terminal of the battery with a 10 mm key.

Hyundai Creta reversing light bulb replacement

1. Place the car on the site and turn off the ignition.

2. Open the tailgate.

3. Use a spatula or flathead screwdriver to pry up the trim on the door.

4. Remove the trim from the latches and remove.

5. Turn counterclockwise and unscrew the reversing lamp socket.

6. Pull it out of the rear light.

7. Pull and pull out the burnt-out light bulb.

8. Replace the Hyundai Creta reverse light bulb with a working one. Lamp type -  W16W / 16 W.

Note:

Some drivers, for brighter light, replace conventional lamps with LED ones.

9. Install the new bulb back into the socket.

10. Install the cartridge in the lantern, as well as all the removed parts in the reverse order of removal.

11. If necessary, replace the Crete lamp in the other lamp in the same way.

12. After the replacement is completed, check the operation of the new lamps.

Source:  carpedia.club