Replacing the oil seals of the Skoda Octavia gearbox

To replace the oil seals of the gears of the internal constant velocity joints (CV joints) of the Skoda Octavia, drain some of the oil from the manual transmission or the working fluid from the automatic transmission.
THE NOTE
The order of replacement of epiploons of internal SHRUS of mechanical and automatic transmissions is identical and is shown on an example of a mechanical transmission.
You will need: mounting blade, large screwdriver, hammer, mandrel.
1. Place the vehicle on a pit or lift.
2. To replace the inner joint oil seal, remove the wheel drive from the side of the oil seal being replaced.

3. Remove the flanged halyard O-ring using pullers A and B.
4. Replace the second gland in the same way.
5. Install the removed parts in the reverse order of removal.
The reason for oiling the clutch disc on a car with a manual transmission may be a leak in the gearbox input shaft oil seal.

Source: http://skoda-octavia2.ru/index.php/transmissia/134-zamena-salnikov-korobki-peredach.html