Renault Sandero ball joint replacement

We change the ball joint in case of damage to its protective cover or if play is detected in the ball joint.
We carry out work on a viewing ditch or overpass.
We remove the front suspension arm assembly with a ball joint. 

Evenly (from different sides) we pry the support body under the shoulder with a powerful slotted screwdriver and, leaning on the edge of the lever ... 

... we press the ball joint out of the lever hole. 

We inspect the eye of the lever - there should be no cracks or breaks around the hole. 

Before pressing in a new ball joint, carefully clean the seating surface of the lever hole from dirt and corrosion.
Having placed a tool head or a piece of pipe of a suitable diameter under the lever, we insert a new ball joint into the hole.
By striking with a hammer on the mandrel (you can use a tool head) resting on the shoulder of the support housing, we press the support into the lever hole until it stops. 

Further assembly is carried out in the reverse order. 

Source: http://wiki.zr.ru/204-2_%D0%A0%D0%B5%D0%BC%D0%BE%D0%BD%D1%82_Stepway