Nissan
Qashqai
1 generation [2007 - 2010]
Petrol
1 generation [2007 - 2010]
Maintenance
Body and Interior
Undercarriage
Transmission
Steering
Brake system
Engine
Electrical equipment
Ventilation and air conditioning system
Security system
Spare parts and consumables
Lubrication system
Cooling system
Power system
Fuel vapor recovery system
Gas exhaust system
Other Articles
Add to garage Filter

Replacement thermostat Nissan Qashqai 2007 - 2013

print share bookmark_border
0 Views
0.0 Rating
Lift
Not indicated
Car services nearby

Tools:

  • Nozzle for crank 12 mm
  • Collar for end nozzle
  • pliers

Parts and consumables:

  • Thermostat
  • Coolant
  • Coolant drain container
  • Warm water tank

Note:

The need to replace the thermostat with a Nissan Qashqai may arise when the engine temperature is unstable: overheating or insufficient heating. To check the thermostat on a car, start a cold engine and touch the hose from the connector to the pipe of the thermostat cover (shown by the arrow in the photo below) with your hand - it should be cold.

After the coolant temperature reaches 80-84 ° C, the hose should begin to heat up quickly, which indicates the beginning of the circulation of the liquid in a large circle. If this does not happen, and the coolant temperature sensor and engine control unit are OK, replace the thermostat.

Replacement thermostat Nissan Qashqai

We check the temperature of the hose by hand Nissan Qashqai

1. Drain the liquid from the engine cooling system.

Draining liquid from the Nissan Qashqai cooling system

2. Loosen the connecting hose clamp by squeezing its bent ears with pliers.

Loosen the Nissan Cashcai Hose Clamp

3. Move the clamp to the side.

We move the clamp towards the Nissan Qashqai

4. Remove the hose from the fitting.

Disconnect the hose from the nozzle Nissan Cashcai

5. In the same way remove a hose from a branch pipe of the thermostat.

Disconnect the Nissan Cashcai thermostat hose

6. Turn out 2 bolts of fastening of the case of the thermostat Nissan Qashqai to the engine.

Bolts of fastening of the case of the thermostat Nissan Qashqai

7. Remove the body.

Removing the thermostat housing Nissan Cashcai

8. Remove the thermostat from the engine.

We take out the thermostat from the Nissan Qashqai engine

Note:

The opening temperature of the valve is indicated on its body.

Indication of valve opening temperature Nissan Cashcai

Advice:

To check, lower the thermostat removed from the Nissan Qashqai engine into a container of water. Heat the water, stirring constantly, to a temperature of 80-84 ° C. With a further increase in temperature, the thermostat rod should begin to move out of the power element. At a liquid temperature of 95-97 ° C, the thermostat should open completely. If it doesn't, replace the thermostat.

Checking the operation of the Nissan Qashqai thermostat

9. Install the parts in the reverse order of removal.

Note:

When installing the thermostat, position it in the bore of the cylinder block with the drain hole at the top.

Drain hole thermostat Nissan Cashcai

10. Fill in a liquid in the engine cooling system and remove air from it.

The article is missing:

  • High-quality repair photos
  • Tool photo

Source: http://nissan-qashqai.dv13.ru/dvigatel/sistema-oxlazhdeniya/zamena-termostata/

favorite 0
print
share
bookmark_border
None