Renault Kangoo fuel filter replacement

Tools:

• Tubular socket wrench 10 mm

Parts and consumables:

• Sealing gum
• Fuel filter
• rags

Fuel filter PATRON PF3250.

The location of the filter in the car with a hole for the water sensor in the filter.

1 . Remove the fuel feed lines by simply pressing the green button and lifting them up.

2 . By turning counterclockwise, remove the water sensor. We change the sealing gum on the sensor. Spilled fuel wipe with a rag. 

3 . Unscrew the filter with a key of 10, and replace the old one with a new one.

4. Install the water sensor by turning it half a turn clockwise. Remove the caps and connect the fuel lines to the filter.

5. Unscrew the air bleed valve on the filter and fill the filter with fuel using a bulb on the incoming fuel line (marked on the filter with the inscription "IN"). As soon as the filter is filled (fuel flows through the bleed valve), close this valve. The photo shows the bleed valve, but the fuel lines are not connected.

6 . Continue pumping fuel into the system until it is completely full. Wipe up spilled fuel.

7 . Start the motor.

The article is missing:

• Tool photo

Source:  https://www.drive2.ru/l/6206979/