Description of the instrument cluster Mercedes-Benz Vito W639

The photo shows the location of instruments and indicators in the instrument cluster.

Dashboard for Mercedes Vito

The instrument cluster contains the following instruments and indicators:

1 - Button for controlling the multifunctional display "menu".

2 - Button for controlling the multifunctional display "reset".

3 - The induction-type speedometer shows the speed at which the car is currently moving. The scale is graduated from 0 to 180-220 km/h (depending on the configuration), the division price is 10 km/h. The speedometer drive is electric from a sensor mounted on the gearbox.

Mercedes Vito speedometer

4 - Multifunctional display (standard or Hight-line). The trip computer is an information system that displays information about the trip on the display: the vehicle's power reserve on the remaining fuel in the tank, average and current fuel consumption, odometer, average speed, travel time, air temperature, hours, information about the outside temperature.

5 - Tachometer. Shows the engine speed. The scale has divisions from 0 to 5. To find out the crankshaft speed in min – 1, you need to multiply the tachometer readings by 100. The red zone is a dangerous mode for the engine.  

Tachometer Mercedes Vito

6 - "minus" control button.

7 -  "Plus" control button.

Note:

Newer models have a fuel indicator on the dashboard.

Indicator lights in the instrument cluster:

1 -  Faulty lighting lamps. Checking outdoor lighting is described in  this article .

2 - Not closed door (s).

3 -  High beam indicator. Checking outdoor lighting is described in this article.

4 - The fan is faulty.

5 - Electronic body leveling system (ENR).

6 - Fasten your seat belts.

7 - The battery does not charge. 

8 - The brake pads are worn out. Front brake pad replacement is described in this article, rear pad replacement is described in this article, parking brake pad replacement is described in this article.

9 -The parking brake is applied.

10 - Left turn indicator.

11 - Right direction indicator.

12 - Pass heating indicator.

13 - Acceleration control system.

14 - Acceleration control/electro-pneumatic active power control (ASR/EPS).

15 - Anti - lock braking system (ABS).

16 - On - board engine diagnostics (check engine).

17 - Oil level below normal. The process of checking the level and how to add oil to a Mercedes Vito is described in this article.

18 - Brake fluid level. Checking the oil level and adding oil is described in this article.

19 - Additional security system.

20 - The coolant temperature is above normal.

21 - The coolant level is below normal. Checking the level and adding coolant is described in this article.

22 - The fuel filter is dirty. Replacing the fuel filter is described in this article.

23 - Water in the fuel filter. Replacing the fuel filter is described in this article.

24 - Air filter dirty. Replacing the air filter is described in this article.

25 - The fluid level in the washer reservoir is below normal. The process of checking the level and adding fluid to the washer fluid reservoir is described in this article.

26 - Low fuel level warning indicator.

27 - Signal indicator of slipping.

28 - Fuel economy indicator.

29 - Automatic adjustment of the engine crankshaft speed.

30 - Particulate filter indicators.

31 - Low beam indicator. Checking outdoor lighting is described in this article.

Source:  http://carpedia.club/