Washer reservoir Skoda Octavia - removal and installation

Tool:

• Box wrench curved 10 mm
• Screwdriver flat medium

1.  Disconnect the wire from the "minus" terminal of the battery, as described here .

2.  Remove the front bumper as described here .

3. Release the clamp by hand.

4.  Disconnect the hose of the evaporative emission system from the mount on the filler neck of the Skoda Octavia washer reservoir.

5.  Disconnect the wiring blocks from the electric pumps.

6.  Disconnect the block of wires from the washer fluid level sensor.

7.  Disconnect the washer hoses from the connecting fittings of the electric pumps.

8. Prying with a screwdriver, disconnect the plastic holder of the wiring harness from the tank.

9. Turn out a bolt of fastening of a bulk mouth. You need a 10 key.

10. Remove two mounting bolts on the left and right sides of the Skoda Octavia washer reservoir. You need a 10 key.

11. Remove the tank.

12. Install the Skoda Octavia washer reservoir and all removed parts in the reverse order of removal.

The article is missing:

• High-quality repair photos

Source :  http://skoda-octavia2.ru/index.php/skhema-elektrooborudovania/232-bachok-omyvatelej-snyatie-i-ustanovka.html