Tool:
- Key with Torx tip (asterisk) Т20
- Screwdriver flat medium
Parts and consumables:
- A few ml of engine oil.
1. Open the front passenger door.
2. Pry off with a flat blade screwdriver and carefully remove.
3. Unscrew the screws with a TORX T20 key.
4. Unscrew the two screws from the bottom of the glove compartment with a TORX T20 key.
5. Unscrew three self-tapping screws with a TORX T20 key.
6. Pull down.
7. Disconnect the pipe and the glove compartment light bulb.
8. Here the glove compartment hangs on one airbag wire.
9. There is a wire going to this block, we do not touch it.
10. The air outlet in the leg area must be removed for convenience, it rests on one self-tapping screw.
11. Pull down as in the photo, and turn the motor itself to the steering wheel by 1.5-2cm. and here he is in his hands.
12. Disconnect the plug.
13. Remove the motor.
14. Lubricate with any engine oil.
15. Collect everything in reverse order.
Source: https://www.drive2.ru/l/2593909/